#6 - 34220 South Fraser Way, Abbotsford, BC V2S 2C6
Cart 0
BEETLE / GHIA/ TYPE 3 1962-66 LHD ULTRARM PITMAN STEERING ARM FOR NARROWED BEAMS, M10 ENDS -RAW

LIMEBUG

BEETLE / GHIA/ TYPE 3 1962-66 LHD ULTRARM PITMAN STEERING ARM FOR NARROWED BEAMS, M10 ENDS -RAW

$370.00

Classic Aircooled VW Steering Boxes parts by Limebug

Limebug Ultrarm, the solution to poor steering lock, uneven steering and fouling shocks / dampers on narrowed beams.

The Problem

The ackermann angle, when a beam is stock width is configured so the inner wheel, when in a corner will turn a tighter radius than the outer, this angle is based on the track width and length of the vehicle.

When a narrowed beam is installed this steering relationship is compromised, this has been commonplace and a factor tolerated for years, the myth being that the beam is the root cause, not the geometry.

The Ultrarm

The ultrarm achieves perfect steering ratios, for both early and late models using late or TRW steering boxes (small spline) for both early and late Track Rod Ends.

Each unit is manufactured in EN24 High Tensile Alloy Steel.

When installing your ultrarm, if fitting to a previously installed "stock" pitman arm, the short rod will require shortening a further 15mm in order to allow for tracking the vehicle.

 

LB-030040170                                                           L14                                                        


Share this Product


More from this category